RIP: To activate RIP, select Send, Receive, or Both from the drop down menu. To disable RIP, select Disable from the drop down menu.

MTU: Enter the Maximum Transmission Unit (MTU) for your network.

Click Apply to save your changes. To reset to defaults, click Reset.

4.4.2.1.2Static IP

IP assigned by your ISP: Enter the static IP assigned by your ISP.

IP Subnet Mask: Enter the IP subnet mask provided by your ISP.

ISP Gateway Address: Enter the ISP gateway address provided by your ISP.

MAC Address: If your ISP requires you to input a WAN Ethernet MAC, check the checkbox and enter your MAC address in the blanks below.

Candidates: You can also select the MAC address from the list in the Candidates.

Primary DNS: Enter the primary DNS provided by your ISP.

Secondary DNS: Enter the secondary DNS provided by your ISP.

RIP: To activate RIP, select Send, Receive, or Both from the drop down menu. To disable RIP, select Disable from the drop down menu.

MTU: Enter the Maximum Transmission Unit (MTU) for your network.

Click Apply to save your changes. To reset to defaults, click Reset.

71

Page 71
Image 71
Billion Electric Company BiGuard 10, BiGuard 2 user manual Static IP