Billion Electric Company BiGuard 2, BiGuard 10 user manual Lan

LAN

1 – 8

Link/ACT: Lit when device is connected.

Blinking when data is transmitting/receiving.

Lit when connected to an Ethernet device.

10/100M : Lit green when connected at 100Mbps. Not lit when connected at 10Mbps.

Link/ACT: Lit when device is connected.

Blinking when data is transmitting/receiving.

1.3.1.2 Rear Panel

2	3	4
1

	Port
1	RESET

	LAN
2	1X — 8X

(RJ-45 connector)

3WAN

4 DC12V

Meaning

After the device is powered on, press it to reset the device or restore to factory default settings.

0-3 seconds: The Status LED will light

6 seconds above: restore to factory default settings (this is used when you cannot login to the router. E.g. forgot the password)

Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the eight LAN ports when connecting to a PC or an office/home network of 10Mbps or 100Mbps.

WAN 10/100M Ethernet port (with auto crossover support); connect xDSL/Cable modem here.

Connect DC power adapter here.(DC12V Power)

12