Billion Electric Company BiGuard 10, BiGuard 2 user manual Pptp

MTU: Enter the Maximum Transmission Unit (MTU) for your network. Click Apply to save your changes. To reset to defaults, click Reset.

4.4.2.1.4PPTP

Username: Enter your user name.

Password: Enter your password.

Retype Password: Retype your password.

PPTP Client IP: Enter the PPTP Client IP provided by your ISP.

PPTP Client IP Netmask: Enter the PPTP Client IP Netmask provided by your ISP.

PPTP Client IP Gateway: Enter the PPTP Client IP Gateway provided by your ISP.

PPTP Server IP: Enter the PPTP Server IP provided by your ISP.

Connection: Select whether the connection should Always Connect or Trigger on Demand. If you want the router to establish a PPTP session when starting up and to automatically re-establish the PPTP session when disconnected by the ISP, select Always Connect. If you want to establish a PPTP session only when there is a packet requesting access to the Internet (i.e. when a program on your computer attempts to access the Internet), select Trigger on Demand.

Idle Time: Auto-disconnect the router when there is no activity on the line for a predetermined period of time. Select the idle time from the drop down menu. Active if Trigger on Demand is selected.

IP Assigned by your ISP: If your IP is dynamically assigned by your ISP, select the Dynamic radio button. If your IP assigns a static IP address, select the Static radio button. This will take you to another page for inputting the IP address information.

73