Briggs & Stratton RIDER 11 Checking the oil level in the transmission, Wheels, Delivery measures

Checking the oil level in the transmission

(Not Rider 11)

Remove the transmission cover. Loosen both screws (one on each side) and lift off the transmission cover.

Check that there is oil in the transmission’s oil tank. Fill if necessary with engine oil SAE 10W/30 (class SF–CC).

IMPORTANT INFORMATION

Check and top up with oil after each test drive. The oil level will drop if there are air pockets in the transmission.

Wheels

Fit the wheels (certain markets). The tyre pressures should be 60 kPa (0,6 kp/cm2 /8,5 PSI) on all the wheels.

To improve the driving capacity the pressure in the back tyres can be reduced to 40 kPa

(0,4 kp/cm2 /5,6 PSI).

Maximum permitted pressure is 100 kPa (1,0 kp/cm2 /14 PSI).

IMPORTANT INFORMATION

Different pressures in the front tyres will cause the blades to cut the grass at different heights.

Checking and adjusting of the mowing deck’s ground pressure and parallelism

Carried out after checking the tyre pressures. See respective sections in this Workshop Manual.

Delivery measures

English – 13