Briggs & Stratton RIDER 11 manual Reparation instructions, Removing engine, Important Information

Reparation instructions

Removing engine

The figures under ”Dismantling” show Rider 11, 13 and Rider 16 in older designs (R16 up to the 2002 model), for a more recent Rider 16 design (2003-) see ”Assembling the engine”. The text applies to all versions.

1

IMPORTANT INFORMATION

Hold the bolts so that the poles are not put under strain.

Remove the battery's fixing belt. Remove the safety guard and remove the cable connections. Then, lift out the battery.

2

3

Mark up and remove the engine's electrical connections.

Newer engines, pull the connector apart.

4

Remove the clamp holding the throttle and choke wire. Unhook the wire at its at its attachment.

Remove the cable which leads from the starter relay to the start motor.

English – 23