Briggs & Stratton RIDER 11 BIO, RIDER 16, RIDER 13 BIO manual Reparation instructions

	Reparation instructions
6	10
	~80

Draw the transmission wire along with the other cabling. Place the wire at the bottom in the clamp, under the articulated steering’s bearing.

7

Put the wire in position and screw tight the casing with the rear clamp.

8.Adjust the wire as directed in “Inspection and adjustment of speed regulator”. Connect the rear linkage and fit the lock spring. Tighten the rear lock nut for the linkage.

Fix the hydrostatic transmission wire with a cable ties.

11

Refit the frame plate using the four screws.

9.Check the setting of the neutral position contact. See ”Electrical system\Microswitch neutral position”.

English – 43