Manuals / Briggs & Stratton / Lawn and Garden / Lawn Mower

Briggs & Stratton RIDER 13, RIDER 11 Grinding and balancing of blades, Reparation instructions

Models: RIDER 13 RIDER 13 BIO RIDER 16 RIDER 11 BIO RIDER 11

1 77
Download 77 pages 62.29 Kb
Page 59
Image 59
Grinding and balancing of blades

Reparation instructions

Grinding and balancing of blades

1

WARNING!

When working with the blades, use protective gloves.

•Remove the blades according to the decription in the previous section.

•Clamp the blade in a screw vice and file it so that it becomes sharp.

2

Balance the blade as follows:

•Fix, for example, a mandrel horizontally in a screw vice according to the diagram.

•Push the blade onto the mandrel via the hole in the centre of the blade and check that the blade balances evenly. The diagram shows a blade which needs to be adjusted, it must be ground further to obtain the correct balance (at the arrow).

•Installation is carried out in the reverse removing order.

IMPORTANT INFORMATION

The friction washer must be replaced when replacing the shear pin.

English – 57

Page 58 Page 60
Page 59
Image 59
Briggs & Stratton RIDER 13, RIDER 11 Grinding and balancing of blades, When working with the blades, use protective gloves
Page 58 Page 60