Briggs & Stratton RIDER 13 BIO, RIDER 11 Inspecting the safety system, Electrical system, Works

Electrical system

Inspecting the safety system

The Rider is equipped with a safety system that prevents starting or driving under the following conditions:

The engine should only be possible to start when the cutting unit is in its raised position and the hydrostat pedals are in the neutral position.

The driver does not need to be seated in the driver’s seat.

Make daily inspections to ensure that the safety system works by attempting to start the engine when one of the conditions is not met. Change the conditions and try again.

Check that the engine stops if you temporarily move out off the driver’s seat while the cutting unit is lowered or the hydrostat pedals are not in the neutral position.

Start engine Works

Ignition system Does not work

N

Rider 11

2 1

Rider 13, Rider 16

English – 61