98 Brocade Adapters Administrator’s Guide
53-1001256-01
FCoE port properties (CNA only)
A
FCoE port properties (CNA only)The FCoE Port properties panel enables you to display the properties that are associated with a
selected FCoE port.
Opening the properties panel
Select an FCoE port in the device tree and click the Properties tab in the right pane.
Fields and components
Field Description
FCoE Port information
State The state of the FCoE port (online or offline).
PWWN The FCoE port’s world wide name.
NWWN The node’s world wide name.
Supported Classes The class that is supported on the selected FCoE port.
Symbolic Name The nickname for the selected FCoE port.
MTU The FCoE port’s maximum transmission unit, based on the specified
FC frame size.
Beacon State Indicates whether beaconing is on or off.
Portlog Indicates whether the port log is enabled or disabled.
FCoE information
FIP state The state of the Fibre Channel Initialization Protocol (online or
offline).
Priorities Lists the available priorities.
PG ID The priority group ID. Values are 0-7 and 15 (strict priority).
Bandwidth The bandwidth percentage for a given priority group.
Advanced Port Parameters
Queue Depth The number of I/O operations that can be run in parallel on a device.
Interrupt Control Coalesce Indicates whether interrupt control is on or off. The value will be off,
because Interrupt Control Coalesce is not supported on the CNA.
Interrupt Control Latency Sets the interrupt control latency value.
Interrupt Control Delay Sets the interrupt control delay value.
Fabric Paramete rs
Port Type The port type; for example, N_Port.
FC Address The FCoE port’s Fibre Channel address.
Local Port MAC The media access control address of the local port.
Configured Port State Indicates whether the FCoE port is enabled or disabled.
Operating Port State Indicates whether the port is online or offline.