Setting Volume Amplify

Please carefully read Setting the Handset Volume before you do the following steps:

1

Press Menu/Set, 1, 4.

4.VOLUME AMPLIFY

 

 

2

Press or to select VOL AMPLIFY:OFF? if

VOL AMPLIFY:OFF?

 

none of the users are hearing-impaired and go to

 

 

Step 4—OR—If some or all of the users are hearing-

 

 

impaired, select VOL AMPLIFY:ON? and then press Menu/Set.

3

Press or to select PERMANENT? if all the users

PERMANENT?

are hearing-impaired—OR—Select TEMPORARY? if only some of the users are hearing-impaired.

4 Press Menu/Set.

5 Press Stop/Exit.

Setting the Speaker Volume

You can adjust the speaker volume by pressing Hook, and then selecting a speaker volume level.

Press or to adjust the volume level. The LCD shows the setting you are choosing.

Each key press changes the volume to the next setting. The new setting will remain until you change it again.

Setting the Ring Volume

You can adjust the ring volume when your fax machine is idle. You can select a ring volume level or press until the ring is off.

Press or to adjust the volume level. With each key press, the fax machine rings so

you can hear the current setting and the LCD shows the setting you are choosing. Each key press changes the volume to the next setting. The new setting will remain until you change it again.

Memory Storage

In the event of a power failure, all settings in the INITIAL SETUP, SETUP RECEIVE, SET AUTO DIAL and REMOTE FAX OPT plus the COVERPG SETUP and COVERPAGE MSG (from SETUP SEND) functions are

stored permanently. You may have to reset the date and time.

4 - 5 I N I T I A L S E T U P

Page 40
Image 40
Brother FAX-775 owner manual Setting Volume Amplify, Setting the Speaker Volume, Setting the Ring Volume, Memory Storage