Installing Brother Printer Driver (For Parallel Interface)

(For Windows® 95/98 and Windows NT® Workstation

Version 4.0 Only)

1Insert the Brother CD-ROM into your CD-ROM drive.

2Enter the command for your version of Windows® , if needed.

After you insert the Brother CD-ROM, you must type the appropriate command for your version of Windows® :

If you are using Windows® 95/98 or Windows NT® Workstation Version 4.0, the Software Installation program appears automatically when you insert the Brother CD-ROM.

—OR—

You can also click Start at the Desktop, select Run and then enter x:\SETUP.EXE. (“ x” is the drive letter for your CD-ROM drive.)

If you are using Windows® 3.1x:

Insert the Brother CD-ROM for the MFC 8300 printer driver into your CD-ROM drive.

From the Program Manager, click on File, then Run.

Enter x:\SETUP. (“ x” is the drive letter for your CD-ROM drive.)

The Brother LOGO will be displayed on the screen.

If you are using Windows NT® 3.51 or earlier, the following error message will appear on the screen:

You are running Windows NT® 3.51 or earlier. Brother MFL Pro does not support this version of Windows NT® . YOU MUST UPGRADE TO WINDOWS NT 4.0 AND REINSTALL MFL Pro!!

If you are using Windows NT® Workstation 4.0 and you are not logged-in as the Administrator, an error message will appear explaining the problem.

12 - 10

S E T U P B R O T H E R M A C H I N E W I T H P C

Page 108
Image 108
Brother FAX 4750 manual Installing Brother Printer Driver For Parallel Interface, If you are using Windows