13

For DOS Users

(For MFC 8300, MFC 8600 and MFC 8700 Only)

DOS printing is NOT available for the FAX 4750 and FAX 5750.

How to Use Brother machine with Your DOS Application Software

Before working with your application software that runs on DOS, check that the Brother machine’s name appears in the printer selection of your application software. If the machine is not listed, you must install the printer driver that corresponds to HP LaserJet IIP’s emulations.

The following table shows combinations of printer drivers and emulation mode. To get the most out of this machine, you should install an HP printer driver in your application software.

Printer driver supported in

Emulation mode to be selected with

your application software

the remote printer console program

 

 

HP LaserJet IIP™

HP LaserJet IIP emulation mode

HP LaserJet II™

Auto emulation selection

 

 

The best or recommended printer driver is indicated in bold.

Be sure to choose the proper printer driver in your application software.

Be sure the printing resolution is set to 300 dpi in your DOS application software.

What Does the Remote Printer Console Do?

The Remote Printer Console (RPC) is a utility program that can run in the DOS environment and comprises the following two programs:

Remote Printer Console Main Program

This program allows you to change various printer settings such as emulation, print quality, fonts, page setup etc., from your computer screen. Since most DOS applications have a Printer Settings menu that overrides the settings made by the RPC, you may not have to use this utility program. This utility program is useful for application software that does not control the printer’s settings and features.

F O R D O S U S E R S

13 - 1

Page 111
Image 111
Brother FAX 4750 manual For DOS Users, What Does the Remote Printer Console Do?, HP LaserJet IIP