Brother FAX 4750 manual Setting Fax Storage, Programming Paging Number

Programming Paging Number

When Paging is selected, your machine dials the pager number you’ve programmed, and dials your Personal Identification Number (PIN) when connected, to activate your pager and let you know you have a fax message in the memory.

1For the FAX, press Function , 8 , 1 . For the MFC, press Function , 1 , 8 , 1 .

2 Press or	until the screen displays			PAGING?￿
and press Set .				SELECT <- -> & SET
3 Enter your pager phone number (up to 20				PAG#:￿
digits) followed by			and press Set .	ENTER & SET
Do not include the area code if it is the same as that of your machine.
For example,	1 8 0	0 5 5 5 1 2 3 4		.

4If your pager requires a PIN, enter the PIN, press , press Redial/Pause , enter

your fax number, then press			and press Set .
For example,		1 2 3 4 5	Redial/Pause	1 8	0	0 5 2	1 2 8 4 6	.
—OR—	If you do not need a PIN, press Redial/Pause , enter the fax number,
then press		and press Set .
For example, Redial/Pause 1 8 0			0 5 2	1 2	8	4 6	.

5Press Stop to exit.

You cannot change a Paging number or PIN remotely.

Setting Fax Storage

If you set Fax Storage to ON, you will be able to retrieve fax messages from another location, using Fax Forwarding, Paging, or Remote Retrieval functions. The screen will indicate when you have a fax stored in memory. (See Remote Retrieval, page 9-3.)

1For the FAX, press Function , 8 , 2 . For the MFC, press Function , 1 , 8 , 2 .

2 Press or to select ON (or OFF) and	FAX STORAGE:OFF?￿
press Set .	SELECT	& SET

3Press Stop to exit.

If there are faxes in memory when you turn Fax Storage to OFF, the screen prompts you to erase any faxes in memory.

If you press 1 , all fax data is erased and	ERASE	ALL FAX?￿
Fax Storage is turned off. If you press 2 ,	1.YES	2.NO
data is not erased, and Fax Storage remains on.

9 - 2 R E M O T E F A X O P T I O N S