Brother FAX 4750 manual Setting the Speaker Volume, Setting the Ring Volume, Memory Storage

Setting Volume Amplify

Please carefully read “Choosing the Handset Volume,” page 4-4 before you do the following steps:

1For the FAX, press Function , 1 , 7 . For the MFC, press Function , 1 , 1 , 7 .

2If none of the users are

hearing-impaired, press or to select VOL AMPLIFY:OFF? and press Set , then go to Step 4

—OR—

If some or all of the users are hearing-impaired, select

VOL AMPLIFY:ON? and press Set .

3If all the users are hearing-impaired,

press or to select PERMANENT? and press Set

—OR—

If only some of the

users are hearing-impaired, select TEMPORARY? and press Set .

4Press Stop to exit.

Setting the Speaker Volume

VOL AMPLIFY:ON?￿ SELECT <- -> & SET

PERMANENT?￿ SELECT <- -> & SET

TEMPORARY?￿ SELECT <- -> & SET

You can adjust the speaker volume when your machine is on Hook .

Press Volume or to adjust the volume level. The display shows the setting you are choosing. Each key press changes the volume to the next setting. The new setting will remain until you change it again.

Setting the Ring Volume

You can adjust the ring volume when your machine is idle. You can turn the ring OFF or you can select a ring volume level.

Press Volume or to adjust the volume level. With each key press, the machine rings as you hear the current setting and the display shows the setting you are choosing. Each key press changes the volume to the next setting. The new setting will remain until you change it again.

Memory Storage

In the event of a power failure, all settings in the INITIAL SETUP, SETUP RECEIVE, SET AUTO DIAL and REMOTE FAX OPTIONS, plus the COVERPG SETUP and COVERPG MSG (from SETUP SEND) functions are stored permanently. You may have to reset the date and time.

I N I T I A L S E T U P 4 - 5