Samsung SF-430 manual Adjusting Shading, Setting the Product to be Checked by Phone

Adjusting Shading

If the scanning unit becomes dirty, it can alter the shading value. If your print has black lines or is blurred, adjust the shading setting. Take the following steps:

1Load a sheet of white Letter-size paper into the document feeder.

2Press Setup.

3Press the Scroll buttons ( or ) until you see “8.MAINTENANCE” on the display and then press Enter.

4Press the Scroll buttons ( or ) until you see “ADJUST SHADING” on the display and then press Enter.

NOTE: Do not remove paper from the document feeder while adjusting.

Setting the Product to be Checked by Phone

The Remote Test feature allows your product to be checked out by a service company at a remote place by phone.

1Press Setup.

2Press the Scroll buttons ( or ) until you see “8.MAINTENANCE” on the display and then press Enter.

3Press the Scroll buttons ( or ) until you see “REMOTE TEST” on the display and then press Enter.

4Press the Scroll buttons ( or ) to turn this feature ON and then press Enter.

If you want to protect your product from being accessed by unauthorised persons, select “OFF”.

6.20MAINTENANCE