Samsung SF-430 manual Polling a Remote Machine

5Press the Scroll buttons ( or ) until you find “SEND POLLING”, and then press Enter.

The display asks you to enter a 4-digit poll code. The poll code is preset to “0000” at the factory, which represents no poll code.

6If you want to use a poll code, enter the desired 4-digit code (except for “0000”) and then press Enter.

Or

If you do not want to secure the transmission with a poll code, press Enter when the display shows “0000” for the poll code, or enter 0000.

7The product stores the document in the memory. The display counts the number of pages being stored in the memory and the memory capacity remaining.

The product returns to Standby mode and the display shows a reminder that “POLL TX” is set.

NOTE: If you have previously set the receive mode to other than FAX mode, the product automatically switches to FAX mode (automatic receiving) when set to be polled.

5

Polling a Remote Machine

Your product will poll a remote fax machine and retrieve a document, which is stored in memory and then print it.

1Lift the handset or press OHD/V.Req on the front panel, and enter the phone number of the remote fax machine.

2When you hear a fax tone from the remote machine, press Setup.

3When the display shows “TO RX POLL PRESS ENTER”, Press Enter.

The display asks you to enter a 4-digit poll code. The poll code is preset to “0000” at factory. 0000 represents no code.

FAX 5.33