Samsung manual General Printing Problems, Created Samsung SF-430 Series Copy x where

Symptom	Cause and Solution
Envelopes skew or fail	Ensure that the paper guide is against the left side of
to feed correctly.	the envelopes.

General Printing Problems

Problem	Possible Cause and Remedy
Your product	• The printer cable is not connected properly. Check the
does not print.	printer cable connection.
	• The printer cable is defective. Swap the cable with one
	known to work.
	• The port setting is incorrect. Check the Windows printer
	settings to make sure that the print job is being sent to
	the correct port (for example, LPT1).
	• You have unplugged the USB cable from your computer
	then plugged back to a different USB port than you have
	used before. In this case, your printer driver creates a
	virtual printer in the Printer folder on your computer
	system each time you use another different port. You
	have to remove the newly created virtual printer(s). To
	remove:
	1. Open the Printer folder and right-click on the last
	created Samsung SF-430 Series Copy x (where
	x is the number of the created virtual printers).
	2. Select Properties from the pop-up menu and then
	click Ports tab.
	3. Locate the USB port which is checked and then close
	the Printer folder.
	4. Reopen the Printer folder.
	5. Right-click on the original printer Samsung SF-430
	Series.
	6. Select Properties from the pop-up menu and then
	click Ports tab.
	7. Put a check mark in the checkbox of the USB port you
	have found at step 3.
	8. Remove Samsung SF-430 Series Copy x from
	the Printer folder.

7.12TROUBLESHOOTING