Samsung SF-430 manual Setting the PIN Code

Setting the PIN Code 1

You can set the product to require a special PIN (Personal Identification Number) code when somebody tries to make colour copy. The PIN code helps you prevent your product being used by unauthorised persons.

Take the following steps to activate this feature and set the PIN code:

1Press Setup on the front panel. The display shows “1.SYSTEM SETUP” on the bottom line.

2Press Enter.

3Press the Scroll buttons ( or ) repeatedly until you find “PIN CODE”, and press Enter.

4Press the Scroll buttons ( or ) repeatedly to select “ON”, and press Enter.

If you want to disable the PIN code, select “OFF”. You do not need to continue the following steps.

5The display prompts you to enter the PIN code number. Enter the four-digit code number as your preference using the number keypad.

The PIN code is preset to “0000” at the factory.

6Press Enter to save the setting.

You will be required to enter the four-digit code each time you press the Start Copy Color button.

SETUP 1.43