Samsung SF-430 manual Receiving Automatically in FAX Mode, Receiving in Auto Mode

Receiving Automatically in FAX Mode

Your product is preset to FAX mode at the factory. If you have changed the receive mode, take the following steps to receive faxes automatically:

1Press Receive Mode on the front panel repeatedly until you see “FAX”. Then, press Enter.

2When you receive a call, the product answers the call on a specified number of rings and receives a fax automatically. To change the number of rings, see “Fax Setup Options” on page 5.38.

To adjust the ringer volume, see “Setting Sounds” on page 1.41.

Receiving in AUTO Mode

1Press Receive Mode on the front panel repeatedly until you see “AUTO”. Then, press Enter.

2When you get a call, the product answers it.

If a fax is being sent, the product goes into reception mode.

If the product does not detect a fax signal, it will continue ringing to tell you it is a phone call. You should pick up the handset to answer the call, or it will switch to automatic reception mode.

5.16FAX