Samsung SF-430 You attempted to add Check the display if there is, Properly connected to, Your PC

Display	Meaning	Solution
LOAD DOCUMENT	You have attempted to	Load a document and try
	set up a sending	again.
	operation with no
	document loaded.
MEMORY FULL	The memory is full.	Either delete unnecessary
		documents, or retransmit
		after more memory becomes
		available, or split the
		transmission into more than
		one operation.
MEMORY JOB	You attempted to add	Check the display if there is
NOT ASSIGNED	documents when there is	any scheduled job. The
	no scheduled job.	display should indicate the
		job in Standby mode (for
		example, DELAY TX or SAVE
		TOLL).
NO ANSWER	The remote machine has	Try again. Make sure the
	not answered after all	remote machine is
	the redial attempts.	operational.
NO. NOT	The one-touch or speed	Dial the number manually
ASSIGNED	dial location you tried to	with the keypad, or assign a
	use has no number	number.
	assigned to it.
PC NOT	Your product is not	Check the cable connection
AVAILABLE	properly connected to	between the product and the
	your PC.	PC. Connect properly using a
		parallel or USB cable. See
		page 1.10.
POLLING ERROR	The remote fax machine	The remote operator should
	you want to poll is not	know in advance that you are
	ready to respond to your	polling and have their fax unit	7
	poll.	loaded with the original
	Or	document.
		Or
	When setting up to poll
	another fax machine,	Enter the correct poll code.
	you have used an
	incorrect poll code.

TROUBLESHOOTING 7.7