Samsung SF-430 Blurred or, Let the ink dry before handling the paper Characters with, White lines

Problem	Possible Cause and Remedy
Blurred or	• You may printing on the wrong side of the paper. Turn
smudged ink	the paper over and print on the other side.
	• The paper may not meet paper specifications (for
	example, too moist or too rough). See “Paper Selection”
	on page 2.2.
	• Let the ink dry before handling the paper.
Characters with	• The print cartridge may be almost empty. Check the
white lines	contacts of the print cartridge and replace, if necessary.
	• The print cartridges may need to be cleaned. See
	“Cleaning the Print Cartridges” on page 6.3.
Characters are	• The print media is loaded incorrectly or is an
improperly formed	unsupported size or type. Use the print media specified
or not aligned	in “Paper Selection” on page 2.2.
correctly	• If characters are improperly formed, producing a wavy
	effect, the scanner unit may need servicing.
	• The print cartridges may need to be cleaned. See
	“Cleaning the Print Cartridges” on page 6.3.
	• The print cartridges may need to be aligned. See
	“Aligning the Print Cartridges” on page 6.16.
Vertical lines in	• The print cartridge may need to be cleaned. See
tables, borders	“Cleaning the Print Cartridges” on page 6.3.
and graphics not	• The print cartridge may need to be aligned. See
smooth
	“Aligning the Print Cartridges” on page 6.16.
Solid black areas	• Change the fill pattern in the application software.
contain white
streaks
Printing appears	• The print resolution selected in the printer driver may
jagged	be low. Check the printer driver for the correct
	resolution. Printing in low resolution will give the	7
	printout a jagged look. Change the Print Quality to a
	higher resolution. See page 2.11.

TROUBLESHOOTING 7.17