Delta Electronics VFD-VE Series manual Setting 10-04 ASR Auto Speed

Chapter 4 Parameters

Group 9 Communication Parameters

Pr.	Explanation	Settings	Factory	VF	VFPG	SVC	FOCPG	TQRPG
			Setting
09-21	Multi-function Output	0~65535	Read-	○	○	○	○	○
	Status		only
09-22	AFM2 Status	0~4095	Read-	○	○	○	○	○
			only
09-23	AFM3 Status	0~4095	Read-	○	○	○	○	○
			only

Group 10 Speed Feedback Control Parameters

New parameters 10-29~10-30

Pr.	Explanation	Settings	Factory	VF	VFPG	SVC	FOCPG	TQRPG
			Setting
10-04	ASR (Auto Speed	0~40	10		○		○
	Regulation) Control ( P) 1
10-06	ASR (Auto Speed	0~40	10		○		○
	Regulation) Control ( P) 2
10-21	P Gain of Zero Speed	0~40	10		○		○
10-29	PG Mechanical Gear A2	1~5000	100		○		○	○
10-30	PG Mechanical Gear B2	1~5000	100		○		○	○

Group 11 Advanced Parameters

Updated parameters 11-00 and 11-09~11-10 and new parameters 11-18~11-40.

		Pr.	Explanation	Settings	Factory	VF	VFPG	SVC	FOCPG	TQRPG
					Setting
				bit 0: ASR Auto tuning	0				○
			System Control	bit 1: Inertia estimate
11-00				bit 2: Zero Servo
				bit 3: Reserved
				bit 4: Enable gain adjustment of position loop KP
11-07			Detection Time for	0.01~600.00 sec	0.20	○	○	○	○	○
			Phase-loss
	11-08		Reserved
11-09			Level of Phase-loss	0.0~320.0	60.0	○	○	○	○	○
			Speed Feed Forward	0~100%	0				○
11-10			Gain
11-11			Zero-speed	0~40Hz	10		○		○	○
			Bandwidth
11-12			Speed Response of	0: Disable	65				○
			Flux Weakening Area	0~150%
	11-13		Notch Filter Depth	0~20db	0				○
11-14			Notch Filter	0.00~200.00	0.00				○
			Frequency
11-15			Gain Value of Slip	0.00~1.00	1.00			○
			Compensation
11-16			Low-pass Filter Time	0.001~65.535sec	0.100	○	○	○	○	○
			of Keypad Display
11-17			Low-pass Filter Time	0.000~65.535sec	0.100	○	○	○	○
			of PG2 Pulse Input
11-18			APR Gain	0.00~40.00	10.00				○
11-19			APR Curve Time	0.00~655.35 sec	3.00				○
	11-20
			Reserved
11-28
			Accumulative	0~65535 (hour)	0	○	○	○	○	○
11-29			Operation Time of
			Phase-loss
	11-30
			Reserved
11-40

Revision August 2008, 03VE, SW V2.04 4-37