Delta Electronics VFD-VE Series manual Settings Functions Descriptions

Chapter 4 Parameters

Settings		Control Mode
	VF	VFPG	SVC	FOCPG	TQRPG
12: Mechanical brake release (Pr.02-31)	○	○	○	○	○
13: Overheat	○	○	○	○	○
14: Software brake signal	○	○	○	○	○
15: PID feedback error	○	○	○	○	○
16: Slip error (oSL)	○	○	○	○
17: Terminal count value attained (Pr.02-16)	○	○	○	○	○
18: Preliminary count value attained (Pr.02-17)	○	○	○	○	○
19: Baseblock (B.B.) Indication	○	○	○	○	○
20: Warning output	○	○	○	○	○
21: Over voltage warning	○	○	○	○	○
22: Over-current stall prevention warning	○	○	○
23: Over-voltage stall prevention warning	○	○	○	○	○
24: Operation mode indication	○	○	○	○	○
25: Forward command	○	○	○	○	○
26: Reverse command	○	○	○	○	○
27: Output when current >= Pr.02-32	○	○	○	○	○
28: Output when current < Pr.02-32	○	○	○	○	○
29: Output when frequency >= Pr.02-33	○	○	○	○	○
30: Output when frequency < Pr.02-33	○	○	○	○	○
31: Y-connection for the motor coil	○	○	○	○
32: Δ connection for the motor coil	○	○	○	○
33: Zero speed (actual output frequency)	○	○	○	○
34: Zero speed with Stop (actual output frequency)	○	○	○	○
35: Error output selection 1 (Pr.06-23)	○	○	○	○	○
36: Error output selection 2 (Pr.06-24)	○	○	○	○	○
37: Error output selection 3 (Pr.06-25)	○	○	○	○	○
38: Error output selection 4 (Pr.06-26)	○	○	○	○	○
39: Position attained (Pr.10-19)				○
40: Speed attained (including zero speed)	○	○	○	○
41: Multi-position attained				○
42: Crane function	○	○	○	○
43: Motor zero-speed output (Pr.02-43)	○	○	○	○
44: Max. reel diameter attained	○	○	○	○	○
45: Empty reel diameter attained	○	○	○	○	○
46: Broken belt detection	○	○	○	○	○
47: Break release at stop	○	○	○	○	○
48: Error PID feedback of tension	○	○	○	○	○
49: Reserved
50: Reserved

Settings	Functions	Descriptions
0	No Function
1	Operation Indication	Active when the drive is not at STOP.
2	Master Frequency	Active when the AC motor drive reaches the output frequency
	Attained	setting.
3	Desired Frequency	Active when the desired frequency (Pr.02-19) is attained.
	Attained 1 (Pr.02-19)

4-70 Revision August 2008, 03VE, SW V2.04