Delta Electronics VFD-VE Series manual 10-16, 10-17, 10-18, 10-19

Chapter 4 Parameters

4

Phase A is a pulse input and phase B is a direction input. (low input=forward direction, high input=reverse direction)

FWDREV

A

B

10-16	Output Setting for Frequency Division (denominator)			Unit: 1
Control	VFPG	FOCPG TQRPG		Factory Setting: 1
mode
	Settings		1 to 255
This parameter is used to set the denominator for frequency division. For example, when it is
set to 2 with feedback 1024ppr, PG output will be 1024/2=512ppr.
10-17	PG Electrical Gear A (Channel 1 of PG card)			Unit: 1
Control	VFPG	FOCPG		Factory Setting: 100
mode
	Settings		1 to 5000
10-18	PG Electrical Gear B (Channel 2 of PG card)			Unit: 1
Control	VFPG	FOCPG		Factory Setting: 100
mode
	Settings		1 to 5000
Rotation speed = pulse frequency/encoder pulse (Pr.10-00) * PG Electrical Gear A / PG
Electrical Gear B.
10-19	PG Position Control Point (Home)			Unit: 1
Control	VFPG	FOCPG		Factory Setting: 0
mode
	Settings		0 to 20000
This parameter determines the home position in the position control.

4-154 Revision August 2008, 03VE, SW V2.04