Delta Electronics VFD-VE Series manual 08-50, 08-51, 08-52, 08-54, 08-56

Chapter 4 Parameters

	Control	VF	VFPG	SVC	FOCPG TQRPG	Factory Setting: 1
	mode
		Settings		1 to 10000ppr
08-50		Coil Number for Each Layer				Unit: 1
	Control	VF	VFPG	SVC	FOCPG TQRPG	Factory Setting: 1
	mode
		Settings		1 to 10000
	08-51	Material Thickness				Unit: 0.001
	Control	VF	VFPG	SVC	FOCPG TQRPG	Factory Setting: 1.000
	mode
		Settings		0.001 to 60.000mm
	08-52	Filter Time of Reel Diameter				Unit: 0.01
	Control	VF	VFPG	SVC	FOCPG TQRPG	Factory Setting: 1.00
	mode
		Settings		0.00 to 100.00 sec

This parameter can be used to improve unstable of the source of reel diameter(Pr.08-42).

08-53Auto Compensation of Reel Diameter

Control	VF	VFPG	SVC		FOCPG TQRPG	Factory Setting: 0
mode
	Settings	0		Disable
		1		Enable
08-54	Current Reel Diameter					Unit: 0.1
Control	VF	VFPG	SVC		FOCPG TQRPG	Factory Setting: 1.0
mode
	Settings	1.0 to 6000.0 mm

When the AC motor drive is not at STOP, this parameter is read-only.

08-55Smart Start

Control	VF	VFPG SVC FOCPG TQRPG	Factory Setting: 0
mode

Settings 0 Disable

1Enable

2In unwind mode, rewind in reverse direction

08-56	Switch Level for Smart Start and PID Function		Unit: 1
Control	VF	VFPG SVC FOCPG TQRPG	Factory Setting: 15.0
mode

4-132 Revision August 2008, 03VE, SW V2.04