Delta Electronics VFD-VE Series manual Serial position input, 02-07, UP/DOWN Key Mode

Chapter 4 Parameters

Settings	Functions												Descriptions
		When using setting 41 and setting 42, it needs to use with 2
		input terminals for multi-position control.
																								PG position
						DO				SPI Position Command Clock											DI
				C NC																				co ntrol point
																									Pr.10 -19
			Con tro ller
				(PLC)																					main
						DO				SPI Position Command Data											DI
																									shaft
																									VFD -VE
				transmission start
																				PG position
42	Serial position input							1		2	3	4			11 12						co ntrol point
				OSS																		Pr.10 -19
				Clock
			Rea dy for t ra nsmission																		main shaft
				OSS																		VFD-VE
				Dat a
			test example
			angle		Encoder		b11		b10		b9		b8	b7		b6	b5	b4	b3	b2			b1		b0
			360		4096		0			0	0		0	0	0		0	0	0	0			0		0
					4095		1			1	1		1	1	1		1	1	1	1			1		1
			180		2048		1			0	0		0	0	0		0	0	0	0			0		0
			90		1024		0			1	0		0	0	0		0	0	0	0			0		0
			45		512		0			0	1		0	0	0		0	0	0	0			0		0
			137		1558		0			1	1		0	0	0		0	1	0	1			1		0
			308		3504		1			1	0		1	1	0		1	1	0	0			0		0
					3687		1			1	1		0	0	1		1	0	0	1			1		1
43	Analog input resolution	Refer to Pr.10-25.
	selection
44	Reset initial reel	When this function is enabled, the initial reel diameter is reset.
	diameter

45Reset initial reel diameter 0

						When this function is enabled, Pr.08-46~08-48 is valid.
46		Reset initial reel
		diameter 1
47		Reset PID control				When this function is enabled, the PID control integration of
		integration of tension				tension is reset.
48		Mechanical Gear Ratio				When this functioni is enabled, the mechanical gear ratio
						switch will be the second group A2/B2 (refer to Pr.10-29 and
		Switch
						Pr.10-30).
49
		Reserved
50
02-07		UP/DOWN Key Mode
Control		VF	VFPG	SVC	FOCPG		Factory setting: 0
	mode
		Settings	0	Up/down by the accel/decel time
			1	Up/down constant speed (Pr.02-08)

Revision August 2008, 03VE, SW V2.04 4-67