Delta Electronics VFD-VE Series manual 07-36, Emergency Stop EF & Forced Stop Selection

Chapter 4 Parameters

	Positive
	torque	Forward motor mode
Reverse motor mode
06-12 current limit		06-12 current limit

External analog terminals	External analog terminals
Pr.03-00~02	Pr.03-00~02
7: positive torque limit	7: positive torque limit
10: positive/negative torque limit	10: positive/negative torque limit
9: regenerative torque limit

The level of torque limit will be

the min. value of following three values

1.torque limit of Pr.07-32 to Pr.07-35

2.Torque limit of external analog terminals (AVI, ACI and AUI)

3.Pr.06-12 current limit

		Pr.07-35	Pr.07-32
		Reverse regenerative	Forward motor
speed		torque limit	torque limit	speed
		Quadrant II	Quadrant I
		Quadrant III Quadrant IV
		Pr.07-34	Pr.07-33
		Reverse motor	Forward regenerative
		torque limit	torque limit
	External analog terminals		External analog terminals
	Pr.03-00~03-02		Pr.03-00~03-02
	8: negative torque limit		8: negative torque limit
	10: positive/negative torque limit		10: positive/negative torque limit

06-12 current limit

Reverse motor modeNegative torque

06-12 current limit Forward motor mode

07-36	Emergency Stop (EF) & Forced Stop Selection
					Factory Setting: 0
Control	VF	VFPG	SVC FOCPG TQRPG
mode
	Settings	0		Coast stop
		1		By deceleration Time 1
		2		By deceleration Time 2
		3		By deceleration Time 3
		4		By deceleration Time 4
		5		System Deceleration
		6		Automatic Deceleration

When the multi-function input terminal is set to 10 or 18 and it is ON, the AC motor drive will be

operated by Pr.07-36.

4-118 Revision August 2008, 03VE, SW V2.04