Delta Electronics VFD-VE Series specification

Chapter 4 Parameters

Group 8 High-function PID Parameters

	Pr.	Explanation	Settings	Factory	VF	VFPG	SVC	FOCPG	TQRPG
				Setting
			0: No function
			1: Negative PID feedback from external terminal AVI
			(Pr.03-00)
			2: Negative PID feedback from PG card (Pr.10-15, skip
		Input Terminal for PID	direction)	0
08-00		Input Terminal for PID	3: Negative PID feedback from PG card (Pr.10-15)		○	○	○	○
08-00		Feedback	3: Negative PID feedback from PG card (Pr.10-15)		○	○	○	○
			4: Positive PID feedback from external terminal AVI
			(Pr.03-00)
			5: Positive PID feedback from PG card (Pr.10-15, skip
			direction)
			6: Positive PID feedback from PG card (Pr.10-15)
	08-01	Proportional Gain (P)	0.0~500.0%	80.0	○	○	○	○
	08-02	Integral Gain (I)	0.00~100.00 sec	1.00	○	○	○	○
	08-03	Derivative Control (D)	0.00~1.00 sec	0.00	○	○	○	○
	08-04	Upper limit for Integral	0.0~100.0%	100.0	○	○	○	○
	08-04	Control	0.0~100.0%	100.0	○	○	○	○
	08-05	PID Output Frequency	0.0~110.0%	100.0	○	○	○	○
	08-05	Limit	0.0~110.0%	100.0	○	○	○	○
	08-06	PID Offset	-100.0~+100.0%	0.0	○	○	○	○
	08-07	PID Delay Time	0.0~2.5 sec	0.0	○	○	○	○
08-08		Feedback Signal Detection	0.0~3600.0 sec	0.0	○	○	○	○
08-08		Time	0.0~3600.0 sec	0.0	○	○	○	○
			0: Warn and keep operating
08-09		Feedback Fault Treatment	1: Warn and ramp to stop	0	○	○	○	○
08-09		Feedback Fault Treatment	2: Warn and coast to stop	0	○	○	○	○
			3: Warn and keep at last frequency
	08-10	Sleep Frequency	0.00~600.00Hz	0.00	○	○	○	○
	08-11	Wake-up Frequency	0.00~600.00Hz	0.00	○	○	○	○
	08-12	Sleep Time	0.0~6000.0 sec	0.0	○	○	○	○
	08-13	PID Deviation Level	1.0~50.0%	10.0	○	○	○	○
	08-14	PID Deviation Time	0.1~300.0 sec	5.0	○	○	○	○
08-15		Filter Time for PID	0.1~300.0 sec	5.0	○	○	○	○
08-15		Feedback	0.1~300.0 sec	5.0	○	○	○	○
	08-16
		Reserved
	08-20
08-21		Tension Control Selection	0: Disable	0	○	○	○	○
08-21			1: Closed-loop, speed mode		○	○	○	○
			1: Closed-loop, speed mode		○	○	○	○
			2: Line speed, speed mode		○	○	○	○

			3: Reserved

			4: Open-loop, torque mode						○

08-22		Wind Mode	0: Rewind	0	○	○	○	○	○
08-22			1: Unwind
			1: Unwind
	08-23	Mechanical Gear Ratio A	1-65535	100	○	○	○	○	○
	08-23
	08-24	Mechanical Gear Ratio B	1-65535	100	○	○	○	○	○
	08-24
08-25		Source of the Tension	0: Parameter setting (Pr.08-26)	0	○	○	○	○	○
08-25		Command/Line Speed	1: RS-485 communication setting (Pr.08-26)
		Command/Line Speed	1: RS-485 communication setting (Pr.08-26)
			2: Analog input (Pr. 03-00~03-02 is set to 14 PID target
			value of tension, 03-00~03-02 is set to 12 line speed)
08-26		PID Target Value of	0.0~100.0%	50.0	○	○	○	○	○
		Tension/Line Speed
08-27		Source of Tension/Line	0: Analog input (Pr. 03-00~03-02 is set to 11 PID	0	○	○	○	○	○
08-27		Speed PID Feedback	feedback of tension)
		Speed PID Feedback	feedback of tension)
			1: Pulse input (Pr.08-40)
08-28		Auto-tuning Tension PID	0: Disable		○	○	○	○	○
08-28			1: Reel diameter (08-29~08-31corresponds to 08-44,
			1: Reel diameter (08-29~08-31corresponds to 08-44,
			08-32~08-34 corresponds to 08-43)
			2: Frequency (08-29~08-31 corresponds to 01-07, 08-
			32~08-34 corresponds to 01-00)
	08-29	Tension PID P1	0.0~1000.0	50.0	○	○	○	○	○
	08-30	Tension PID I1	0.00~500.00 sec	1.00	○	○	○	○	○
08-31		Reserved
08-31

4-18	Revision August 2008, 03VE, SW V2.04

VFD-VE Series specifications

Delta Electronics VFD-VE Series is a state-of-the-art variable frequency drive (VFD) designed to enhance energy efficiency and improve the operational capabilities of various industrial applications. Renowned for its reliability and performance, the VFD-VE Series serves a diverse range of sectors including manufacturing, HVAC, and water treatment.

One of the primary features of the VFD-VE Series is its advanced control algorithms, which provide precise speed and torque control for AC motors. The series utilizes a vector control method that enables excellent dynamic response and a wide speed range. This is particularly beneficial for applications requiring variable speeds or precise positioning, as it ensures smooth acceleration and deceleration while maintaining optimal performance.

The VFD-VE Series stands out with its Energy Saving Technology. By intelligently optimizing motor control parameters based on the load, the VFD can significantly reduce energy consumption. This built-in functionality not only helps companies save on electricity costs but also contributes to a lower carbon footprint, aligning with global sustainability efforts.

Another key characteristic of the VFD-VE Series is its user-friendly interface. Equipped with a clear and intuitive LCD display, it simplifies monitoring and adjustments, allowing operators to configure settings easily. Additionally, the series supports various communication protocols such as Modbus, EtherCAT, and CANopen, enabling seamless integration with existing control systems for enhanced automation.

The VFD-VE Series is built to withstand harsh industrial environments. Its robust design includes features such as IP20 or IP55 ingress protection ratings, ensuring reliable operation even in dusty or humid conditions. Furthermore, the drives are equipped with advanced thermal management systems that prevent overheating, thereby prolonging the lifespan of the equipment.

Safety is also a priority in the VFD-VE Series, which incorporates multiple safety features such as overvoltage, undervoltage, and overcurrent protection. These safeguards help protect both the drive itself and the connected machinery, minimizing downtime and reducing maintenance costs.

Overall, Delta Electronics VFD-VE Series combines cutting-edge technology, energy efficiency, and robust design to meet the dynamic needs of modern industrial automation. With its advanced features and reliable performance, it is an ideal choice for businesses aiming to optimize their processes and achieve greater energy savings.

Delta Electronics VFD-VE Series manual Group 8 High-function PID Parameters

Models: VFD-VE Series

Chapter 4 Parameters

Group 8 High-function PID Parameters

VFPG

Setting

VFD-VE Series specifications