18

Using Your Brother Machine with Your Apple® New Power Macintosh® G3 or iMac

(For MFC 8300 Only)

For USB equipped Apple New Power Macintosh G3 or iMac with Mac OS 8.5/8.6

This chapter is for the MFC 8300. If you have a MFC 8600 or MFC 8700, please see the Multi-Function Center Software Manual.

The connection, installation and operation instructions are available on the bundled CD-ROM for your USB equipped Apple Macintosh or iMac with Mac OS 8.5/8.6.

1Set up your MFC and make sure that it is working properly.

2Unplug the MFC’s AC power cord and turn off the AC power to your Macintosh or iMac.

3Connect a standard USB cable to both the MFC and Macintosh or iMac.

Install Brother Printer Driver for MFC 8300

1Turn on the power to your Macintosh G3 or iMac and wait for the startup process to be completed.

2Plug in the MFC power cord to turn it on.

3Insert the Brother CD-ROM into your CD-ROM drive. The Brother icon will appear on the desk top.

4Double-click the Brother icon to open the CD.

5Double-click the Brother icon again to run Start. The screen of Brother options will appear:

U S I N G B R O T H E R M A C H I N E W I T H Y O U R A P P L E I M A C

18 - 1

Page 163
Image 163
Brother FAX 4750 manual Install Brother Printer Driver for MFC