130 C H A P T E R F I F T E E N

If You Don’t Have a CD-ROM Drive

All software is supplied on CD-ROM. If you need a Floppy Diskette version (only Multi-Function Link Pro and Visioneer PaperPort LE are available on Floppy Disks, item numbers DSK7131 (for Windows® 3.1 or 3.11) and DSK7195 (for Windows® 95 or 98). If you are using Windows NT® Workstation Version 4.0, the software is not available on Floppy Diskette.). You must tell the Brother Representative the version of Windows® that you are using and your MFC model number. To order, call Brother at 1-888-879- 3232 (USA), 1-800-668-2768 (from within Canada) or 1-514-685-6464 (from within Montreal).

Computer Requirements

The following are the minimum computer requirements you need to set up and operate the MFC as a printer. Use only a shielded interface cable that is IEEE-1284 compliant, and that is less than 6.5 feet (2 meters) long.

CPU

Pentium 75 or Higher

RAM

8MB or greater for Windows® 3.1 or 3.11

 

8MB or greater for Windows® 95 or 98

 

(16MB recommended)

 

16MB or greater for Windows NT® Workstation

 

Version 4.0 (32MB recommended)

Hard Disk Drive

50MB CD-ROM 1

 

250MB CD-ROM 1 & 2

Operating System

Windows® 3.1, 3.11, 95, 98 or NT® Workstation Version 4.0,

 

DOS environment compatible with your Windows®

 

version

Page 145
Image 145
Brother MFC 7150C owner manual If You Don’t Have a CD-ROM Drive, Computer Requirements