52

C H A P T E R S I X

 

 

Registering the Distinctive Ringing Pattern

If you are not sure which ring pattern you have, call your Telephone Company. Then assign that pattern in the steps below.

1Disconnect the MFC from any TAD or telephone company voice mail.

2Set the MFC to MANUAL mode.

3Press Function , 1 , 0 , 1 . The screen displays the current setting of this feature.

4Press or to select the SET mode. The screen displays

DISTINCTIVE:OFF?

DISTINCTIVE:SET?

5Press Set when the screen displays DISTINCTIVE:SET ?.

6Press or to select the prestored ring pattern you want to assign. (You will hear each pattern as you scroll through the four patterns.) Be

sure to choose the pattern assigned by the Telephone Company.

Ring

Pattern

Rings

1long - long

2short - long - short

3short - short - long

4very long (normal pattern)

7Press Set .

8Press Stop to exit.

Once you’ve registered the Distinctive Ringing pattern in your MFC, you can turn this feature ON or OFF. To change the setting, follow steps 1 to 4 above, selecting ON or OFF.

Page 67
Image 67
Brother MFC 7150C owner manual Distinctiveoff? Distinctiveset?, Registering the Distinctive Ringing Pattern