02 . If

T E L E P H O N E ( V O I C E ) O P E R A T I O N

79

 

 

 

See Storing one Touch Dial Numbers p. 71

Access Codes and Credit Card Numbers

Sometimes you may want to choose from among several long distance carriers when you make a call. Rates may vary depending upon the time and destination. To take advantage of low rates, you can store the access codes or long-distance carriers as One Touch numbers. You can store these long dialing sequences by dividing them and setting them up on separate keys in any combination. You can even include manual dialing using the dial pad. The combined number will be dialed in the order you entered it. as soon as you press Start .

You can store "555" on One Touch key 03 and "7000" on One Touch key you press One Touch 03 , 02 , and Start , you can dial "555-7000". To temporarily change a number, you can substitute part of the number with manual dialing using the dial pad. For example, to change the number to 555-7001 you could press One Touch 03 and press 7 , 0 , 0 , 1 using the dialing pad.

If you must wait for another dial tone at any point in the dialing sequence, stare a pause at that point in the number by pressing Redial/Pause . Each key press adds a 3.5 second delay.

Hold

1Press Hold to put a call on Hold.

2You can replace the handset without disconnecting the call.

3 Pick up the MFC handset— OR—Press Speaker Phone to release the call from Hold. Picking up an extension handset will not release the call from Hold.

Pause

Press Redial/Pause to insert a 3.5 second pause between numbers. If you are dialing overseas, you can press Redial/Pause as many times as needed to increase the length of the pause.

Page 94
Image 94
Brother MFC 7150C owner manual Access Codes and Credit Card Numbers, Hold, Pause