Brother MFC 7150C owner manual Changing Fax Forwarding Number

104 C H A P T E R T W E L V E

Changing Fax Forwarding Number

You can change the default setting of your fax forwarding number from a remote fax machine.

1Dial your MFC number.

2When you hear the beep, immediately enter your Remote Access Code

( 1 5 9 ).

3 When you hear two short beeps, use the dial pad to press 9 5 4 .

4Enter the new number of the remote fax machine where you want your

fax messages forwarded, and then press .

You cannot use and as dial numbers. However, if you want to

store a pause, press .

5To retrieve the Memory Status List, when you hear two short beeps, use

the dial pad to press 9 6 1 .

6Use the dial pad to enter the number (up to 20 digits) of the remote fax

machine, and then press .

7After you hear your MFC beep, hang up and wait.

Your MFC calls the remote fax machine. The remote fax machine prints the Memory Status List showing the new forwarding number.

8Check the forwarding number.

If the new number is incorrect, return to Step 1 to reset it.