Brother MFC 7150C owner manual Programming Paging Number, Paging?, PAG# Enter & SET

1 8 0 0 5 5 5 1 2 3 4

82 C H A P T E R T E N

4Enter the forwarding number (up to 20 digits).

5Press Set .

6Press Stop to exit.

Programming Paging Number

When Paging is selected, your MFC dials the pager number you’ve programmed, and dials your Personal Identification Number (PIN) when connected, to activate your pager and let you know you have a fax message in the memory.

1 Press Function , 1 , 8 , 1 .

2Press or until the screen displays

PAGING?

3Press Set . The screen prompts you to enter your pager number.

PAG#:

ENTER & SET

4Enter your pager phone number (up to 20 digits) followed by . Do not include the area code if it is the same as that of your MFC. For

example, .

5Press Set .

6If your pager requires a PIN, enter the PIN, press , press Redial/Pause ,

enter your MFC telephone number, then press			For example,
1	2 3 4 5	Redial/Pause 1 8 0 0 5 2 1 2	8 4 6	.
—	OR—

If you do not need a PIN, press Redial/Pause , enter the fax number of your

MFC, then press . For example,

Redial/Pause 1 8 0 0 5 2 1 2 8 4 6 .

7Press Set .

8Press Stop to exit.

You cannot change a Paging number or PIN remotely.

Press Redial/Pause for each 3.5 second delay, as needed.