3. INSTALLATION
3-2. Installing the motor
3124Q
3125Q
1.Insert the four nuts (1) into the work table.
2.Turn the work table upside down to make it easier to install the motor (2).
3.Align the holder plate (3) and the motor plate (4) with the nuts (1), and then install them with the four washers (5), the four spring washers (6) and the four bolts (7).
4.Place the eight accessory cushions (7) and the four accessory cushion collars (8) onto the motor base plate (9), and then install the motor as shown in the illustration.
Note: The vibration of the motor may cause the bolts to come loose. Make sure that the bolts are securely tightened.
6
