6. OPERATION
No. | Setting items | Setting range | Unit | Default |
|
|
|
|
|
13 | Y alignment | 1 | 0 | |
|
|
|
|
|
14 | θ1 alignment | 1 | 0 | |
|
|
|
|
|
15 | θ2 alignment | 1 | 0 | |
|
|
|
|
|
16 | Eyelet machine speed (*2) | 100 | 0 | |
17 | Eyelet radius | OFF, 1 - 5 | 1 | OFF |
|
|
|
|
|
18 | Taper tact radius | OFF, 1 - 5 | 1 | OFF |
|
|
|
|
|
19 | Taper tact angle | 1 | 0 | |
|
|
|
|
|
20 | Slow start stitches | 0 - 3 stitches | 1 | 0 |
21 | Slow start speed (*3) | 400 - 1,500 rpm | 100 | 1,000 |
22 | Stitch width correction | 0.1 | 0 | |
|
|
|
|
|
29 | Program copy | OFF, 1 - 9 | 1 | OFF |
|
| (Specify copy source) |
|
|
*2 The standard eyelet machine speed is the value that has been set by parameter 00 (sewing speed).
*3 If the sewing speed is set to a speed that is slower than the slow start speed, the slow start speed used for sewing will be the same as the normal sewing speed.
39