Brother rh-918a manual Using the EMERGENCY STOP switch

7. SEWING

7-2. Using the EMERGENCY STOP switch

3058Q

3139Q 3140Q

1.Press the EMERGENCY STOP switch (1).

*All sewing operations will stop and the buzzer will sound. At this time, the warning indicator (2) will flash and "E-60" will flash in the detail display (3).

*If the upper shaft could not stop in the needle up stop position, "E-10" will flash in the detail display (3). In this case, turn the upper shaft pulley by hand to set the upper shaft to the needle up stop position. (Align the marks.)

2.Eliminate the cause of the problem.

3.Release the EMERGENCY STOP switch (1).

4.In automatic mode:

• If continuing on with sewing, press the and keys to determine the position to resume sewing from. Then press the start switch (4). (Sewing will then restart.)

Note: The start switch (4) will not work unless you not press the key at least once.

• To stop sewing, press the RESET key (5). (The feed bracket will return to the cloth setting position.)

In test feed mode or in manual mode:

• Press the RESET key (5). (The feed bracket will return to the cloth setting position.)

RH-981A

46