3. INSTALLATION
3-17. Installing the indexer (option)
3-17-1. Installing the indexer main unit
3015Q
3016Q
3017Q
3018Q
1.After disconnecting air tubes [20] and [21], insert the two plugs (3) into joints (1) and (2). In addition, remove parts (4), (5) and (6) indicated in the illustration.
2.Remove the screws (7) from feed bracket cover (L) (8), and then install feed base (L) (9).
3.Remove the screws (10) from feed bracket cover
(R) (11), and then install feed base (R) (12).
4.Pass the cloth feed bar (13) between the rollers of feed bar guide (R) (14) and feed bar guide (L) (15), and place it on top of feed base (L) (9) and feed base (R) (12).
*Push down the chuck pin (16) and check that it goes smoothly into all of the holes in the cloth feed bar (13).
If it does not go in smoothly,
20
