Brother rh-918a manual Setting the material, 3042Q, 3043Q, 0892Q, 3044Q

5. CORRECT USE

5-7. Setting the material

<-00, -01, -02 specifications>

10 - 30 mm

3042Q 3043Q

1.Insert the material so that it touches the right and left cloth guides (1).

2.The sewing margin can be adjusted to within 10 - 30 mm.

3.Loosen the screws (2) at left and right and move the cloth guides (1) back and forth to adjust the sewing margin.

<-52 specifications>

0892Q

9 - 21 mm for

L1 - L4

9 - 11 mm for

L5 - L7

3044Q 30 - 40 mm

1.Place the material (fly) on top of the feed bracket (1), and then feed the material (fly) in until it reaches horizontal cloth set guide (L) (2) and horizontal cloth set guide (R) (3).

*Check that the right edge of the material (fly) is straight against the left edge of the vertical cloth set guide (4) at this time.

2.The vertical sewing margin can be adjusted between 9 - 21 mm for L1 - L4 and 9 - 11 mm for L5 - L7.

Loosen the four screws (5), and then move horizontal cloth set guide (L) (2) and horizontal cloth set guide (R) (3) forward or back to adjust.

3.The horizontal sewing margin can be adjusted between 30 - 40 mm.

Loosen the two screws (6), and move the vertical cloth set guide (4) to the left or right to adjust.

31

RH-981A