6. OPERATION
6-5. Production counter
3053Q
1.Press the SELECT key (1) to change the mode to automatic mode.
2.Press the
key and 
key simultaneously.
*"PC" will flash in the program number display (2), and the production counter value will appear in the detail display (3).
3.Press the
keys to change the production counter setting.
*The production counter setting will flash while the setting is being changed.
*If you would like to set the production counter to "0", press the RESET key (4).
4.Press the ENTER key (5). The production counter value will be accepted and the mode will return to automatic mode.
*If you press the SELECT key (1) while the production counter value is still flashing, the mode will return to automatic mode without the production counter value being changed.
6-6. Using the program memos
3054Q
Insert the program memos (1) into the rear of the operation box (2) for safekeeping.
Program memo contents
1.Easy reference guide
2.Error code table
3.Parameter table
4.Program notes
Use a lead pencil to make any additions to the parameter table and for writing anything into the program notes. If you do so, additions can be removed using an eraser and the space can be
44
