3. INSTALLATION
3-9. Installing the spool stand
2989Q
1.To assemble the spool stand (1), follow the instructions in the manual that came with the spool stand (1).
2.Secure the spool stand (1) to the rear right corner of the work table with the washer and nut (2).
3-10. Installing the hand switch
3129Q
Install the hand switch (1) with the two screws (2).
3-11. Installing the air unit and the valve unit
2992Q
2387Q
Valve unit
Air unit
Installation position
1.Install the air unit (1) to the underside of the work table with the two screws (2).
2.Install the valve unit (3) with the two screws (4).
3.Connect air tube No. 15 to the intermediate joint (5) of the air unit (1) and to the joint (6) of the valve unit (3), and connect air tube No. 16 to joints (7) and (8).
Connecting the valve cables
Insert the cable (9) which is coming out of the valve unit to the
12