Brother rh-918a Threading the gimp, Pass the gimp through the hole of the thread tension stud

5. CORRECT USE

5-6. Threading the gimp

Remove the work clamp plates (refer to page 26), and then thread the gimp as shown in the illustration below. Once threading is complete, replace the work clamp plates.

<-00,-01> 0884Q 0885Q

<-02,-52>

Pass the gimp through the hole of the thread tension stud (1).

Refer to “9-18. Adjusting the gimp length after trimming” (Page 67).

3041Q

RH-981A

30