Cisco Systems 78-6897-01 manual ATMSwitch# ping

LANE Configuration Examples

LE Client ATM0.1		ELAN name: eng_elan		Admin: up State: operational
Client ID: 1			LEC up for 1 hour 34 minutes 46 seconds
ELAN ID: 0
Join Attempt: 1
HW Address: 00e0.4fac.b402			Type: ethernetMax Frame Size: 1516
ATM Address: 47.00918100000000E04FACB401.00E04FACB402.01
VCD	rxFrames	txFrames	Type	ATM Address
0	0	0	configure
47.00918100000000E04FACB401.00E04FACB405.00
87	1	2	direct
47.00918100000000E04FACB401.00E04FACB403.01
90	2	0	distribute
47.00918100000000E04FACB401.00E04FACB403.01
91	0	95	send
47.00918100000000E04FACB401.00E04FACB404.01
94	42	0	forward

47.00918100000000E04FACB401.00E04FACB404.01

ATM_Switch# ping 172.16.0.1

Type escape sequence to abort.

Sending 5, 100-byte ICMP Echos to 172.16.0.1, timeout is 2 seconds:

!!!!!

Success rate is 100 percent (5/5), round-trip min/avg/max = 1/202/1000 ms

ATM_Switch# ping 172.16.0.3

Type escape sequence to abort.

Sending 5, 100-byte ICMP Echos to 172.16.0.2, timeout is 2 seconds:

!!!!!

Success rate is 100 percent (5/5), round-trip min/avg/max = 1/202/1000 ms

ATM_Switch#

Confirming Connectivity between the ATM Switch Router and the Routers

The following example shows how to use the ping command to confirm the connection between the ATM switch router and routers:

ATM_Switch# ping 172.16.0.1

Type escape sequence to abort.

Sending 5, 100-byte ICMP Echos to 172.16.0.1, timeout is 2 seconds:

!!!!!

4-16ATMSwitch Router Quick Software Configuration Guide