Cisco Systems 78-6897-01 Determining the Destination ATM Switch Router NSAP Address, Example

Configuring the ATM Switch Router

Determining the Destination ATM Switch Router NSAP Address

Determine the destination ATM switch router NSAP address for the interface. See the ATM switch router C in Figure3-3.

Take these steps:

Step Command

1 Switch# show atm addresses

Purpose

On the destination ATM switch router, display the destination ATM address. You need this address to complete the soft PVC. Write the address in the space provided below (or copy it to memory):

2(No command.)

Example

Switch# show atm address

Proceed to the next section, “Configuring the Source ATM Switch Router” to complete the soft PVC.

Switch Address(es): 47.00918100000000E04FACB401.00E04FACB401.00 active

Soft VC Address(es): 47.0091.8100.0000.00e0.4fac.b401.4000.0c84.9030.00 ATM-P9/1/3

47.0091.8100.0000.0061.E5B5.C011.1111.1122.2222.00 ATM0/0/1 47.0091.8100.0000.00e0.4fac.b401.4000.0c85.0020.00 ATM0/1/0 47.0091.8100.0000.00e0.4fac.b401.4000.0c85.0030.00 ATM0/1/1

ILMI Switch Prefix(es): 47.0091.8100.0000.00e0.4fac.b401

ILMI Configured Interface Prefix(es):

LECS Address(es): 47.0091.8100.0000.00e0.4fac.b401.00e0.4fac.b405.00

Switch#

Configuring SVCs, PVCs, SoftPVCs, PVPs, and VPTunnels 3-15