Cisco Systems 78-6897-01 manual Catalyst 5500 Switch, ATM enable ATM# configure terminal

LANE Configuration Examples

Current configuration:

!

version 12.0

<Information deleted>

!

interface ATM3/0 no ip address

atm pvc 1 0 5 qsaal atm pvc 2 0 16 ilmi

!

interface ATM3/0.1 multipoint lane client ethernet eng_elan

!

<Information deleted>

!

end

router1# show inter atm 3/0.1 ATM3/0.1 is up, line protocol is up

Hardware is cxBus ATM

MTU 1500 bytes, BW 156250 Kbit, DLY 80 usec, rely 255/255, load 1/255 Encapsulation ATM-LANE

ARP type: ARPA, ARP Timeout 04:00:00 router1#

Catalyst 5500 Switch 1

Switch1> session 4

Trying ATM-4...

Connected to ATM-4.

Escape character is '^]'.

ATM> enable

ATM# configure terminal

Enter configuration commands, one per line. End with CNTL/Z. ATM(config)# interface atm 0

ATM(config-if)#lane server-bus ethernet eng_elan

ATM(config-if)# end

ATM# copy system:running-config nvram:startup-config

Building configuration...

[OK]

Configuring LANE 4-13