16
NOTE: The 2--wirepigtail is not intended to supportthe weight of the User
Interface. Do not hang the U ser Interface from the equipment Con trol Module
screw terminals.
SRedis V+
SBlack is Vg
7. Push any excess wire into wall and against mountin g base. Seal hole in
wall to prevent air leaks. Leaks can affect operation and cause incorrect
temperatureand/orhumidity measurement.
8. Make sureto attach 2--wirepigtail to DisplayModule mounting base. Itis
packed loose in the box from the factory. Then attach 2--wire pigtail to the
backof the Display Modulevia 2 pin, keyed connector.
9. ReattachDisplay Module body to mountingbase by first setting on at top
of mounting baseand then push bottom corners of DisplayModule to
snap into place. See Fig. 10.
A07169
Fig.10 -- Attach Displayto Backplate