37
TOTEST FAN
Fan button switches FAN icon between AUTO and On. While On is displayed,
G output willbe energized, turning fan on. Allow up to 10 secafter button is
pressedfor fanto turn on and off.On some fan coils,fan continues to operatefor
90sec after G signal is removed.
Final Settings
Besure to press DONE to exit installer setup mode. If the systemis to be left in
operation after installation is complete, use MODE butto n to select between
HEAT,COOL, or AUTO to provide desiredoperation of heating, cooling, or
auto.
On the programmablemodels, the default setpointsand programmed schedule
conformto the Energy Starrrequirementsof the U.S.Department of Energy for
both heating and cooling.These provide energy saving temperaturesettings.
Referto Table 1.
Table1 – Energy StarDefault Schedule
SCHEDULE HEAT COOL
Wake6:00 AM 68_F78_F
Day8: 00 AM 60_F85_F
Evening5:00 P M 68_F78_F
Sleep10:00 PM 60_F82_F
Ifthe programmed scheduleis to be used, make sure the triangleicon next to the
FOLLOW SCHEDULE icon is turnedon. Pressing the Schedule button will
cycle the triangle icon through the FOLLOW SCHEDULE, HOLD and
VACATIONselections.