2
TABLEOF CONTENTS
PAGE
SAFETYCONSIDERATIONS 2....................................
INTRODUCTION 3..............................................
INSTALLATIONCONSIDERATIONS 4..............................
INSTALLATION 7...............................................
SYSTEMSTART--UPAND CHECKOUT 36..........................
OPERATIONALINFORMATION 39................................
TROUBLESHOOTING 43.........................................
WIRINGDIAGRAMS 45..........................................
THERMOSTATCONFIGURATIONRECORD 54......................
SAFETY CONSIDERATIONS
Read and follow manufacturer instructions carefully. Follow all local electrical
codesduring installation.All wiring must conformto local and national electrical
codes.Improper wiringor installation may damageAC/HP Control.
Recognizesafetyinformation. This is the safety--alertsymbol .When you see
this symbol on the equipmentand in the instruction manual, be alertto the
potentialfor personalinjury.
Understandthe signal words DANGER,WARNING,andCAUTION.These
words are used with the safety--alert symbol. DANGER identifies the m ost
serious hazards which will result in severe personal injury o r death. WARNING
signifies a hazard which could result in personal injury or death .CAUTION is
used to identifyunsafe practices whichmay result in minor personalinjury or
productand property damage.NOTE is used to highlightsuggestions which will
result in enhanced installation, reliability, or operation .