28
programmed. Not available with non--programmable thermostats or when
thermostatis configuredas non--programmable.
Defaultis 90.
Option 13 — Room Air Temperature Offset Ad just
The number of _F to be added to the displayed temperature to calibrateor
deliberately miscalibrate the measured room temperature ( --5 to +5_F).
Defaultis 0.
Option15 — Enable Auto Mode
This selection is not available if th e thermostat is configured as Heat Only o r
Cool Only in Option 1. This allow s the homeowner to select auto changeover
mode in addition to heat and cool. This allows the thermostat to au tomatically
change betweenheating mode and cooling mode when sufficientdemand for
heating or cooling exists.
On— Auto mode is available.
OF— Auto mode is not available.
Defaultis On.
Option16 — Maximum Cycles Per Hour
Thisselection limitsthe number of cycles per hour thatthe thermostat allowsthe
system to operate. Selections are 2, 4, 6.
2— The heating and cooling outputswill be energizedno more than 2 timesper
hour.When an output is energized,it willnot be energized againfor 30 minutes.
4— The heating and cooling outputswill be energizedno more than 4 timesper
hour.When an output is energized,it willnot be energized againfor 15 minutes.