3
INTRODUCTION
Bryant’s 7--day, 5/2--day, 1--day programmable and non--programmable
PreferredtSeries ThermostatControl is a wall--mounted,low--voltage control
which combinestemperature and humidity controlin either a single unit or a
two--piece unit. In two--piece configuration, the relays are located near the
equipmentand a two--wireconnection is used between the Display Moduleand
the EquipmentControl Module. Single--pieceinstallation requiresmore wiring
and results in a higher profile. The Preferred Series Thermostat has no need for
batteriesto store user--configuredsettings in memory. During power loss its
internal memory saves settings for unlimited time, and th e clock continues to run
for at least24 hours. An extension of Bryant’s proven lineof thermostats; it
provides separate setpoints for heating and co oling in addition to humidification
and dehumidification.
In the control’s programmable configuration, different heating and cooling
setpointsand times areprogrammable for 4 periods per dayor 2 periods per day.
Programmingcan be done for 7 days per week, 5/2 days per week, or 1 day. The
programmable Thermostat Control can also be user configured as a
non--programmable ThermostatControl. When operating asnon --programmable,
the Preferred Series Thermostat Control will still h ave both temperature and
humidity control.
The non--programmable Thermostat Control featuresTouch ’N’ Gotsettings
for quick and easy temperature change without complicated programming
schedules. The non--programmable Preferred Series Therm ostat Control will still
haveboth temperature and humiditycontrol. And, its Touch’N’ Go technology
enables the user to switch b etween three different user--configurable settings
throughintuitive button s located just below the display.